# PEG Primo Viaggio Nido Infant Car Seat \- Jade \| live price, prepared checkout ## Built for shopping agents: what RoboTrunk does for every product We asked shopping agents, including Meta's Muse first-hand, what they need from a store. This is what they asked for, and what we have built. RoboTrunk is working through its catalogue, so a step may not be done for this one yet. Where a step is done per product, the line ends with what is done for this product. - **Deep research:** We read the maker's manual, independent reviews, video review transcripts and the store's own page, and publish each finding with its source and the date read. `check_product` returns them with a source for each. *This product:* 74 checked facts, research depth trimmed read, checked 2026-10-10T14:45:45.935Z, in the [evidence pack](/agent/evidence/albeebaby-com--peg-primo-viaggio-nido-infant-car-seat-jade). - **Receipts:** Every published fact has a receipt showing its source quote. `check_product` and `get_product` return the checked facts that have one. *This product:* each checked fact listed below has one; the source quotes are in the [evidence pack](/agent/evidence/albeebaby-com--peg-primo-viaggio-nido-infant-car-seat-jade). - **Safety:** `check_product` asks the product-safety regulators live (US CPSC, NHTSA and FDA, Health Canada, the UK's OPSS, Australia's ACCC) whether a recall names a product, listed here or not, and flags a match with its notice; a recall never blocks the buyer. *This product:* this page holds no recall result for it yet; `check_product` asks the regulators now. - **Recall watch:** `watch_recalls` tells the buyer if a product bought here is recalled later. - **Second-hand listings:** `check_listing` runs the same recall check on a second-hand listing someone found, and adds what the listing leaves out and the price new. - **The real price:** The full price to the buyer's country, with shipping and tax, each part quoted from the store's policy or, where a part is not settled, what the total depends on: `check_product` and `search_catalog` take the buyer's country and postcode. *This product:* this store's price was read from its catalogue at 2026-10-19T19:33:47.485Z. - **A checkout that finishes:** RoboTrunk lists only stores whose agent checkout it has verified. `create_checkout` prepares the order at the store; `complete_checkout` returns a link to the store's own checkout. The checkout can be finished in either of two ways: the person taps the link in their own browser, or their agent opens it and completes the checkout. RoboTrunk checks the store's total against a budget ceiling before it issues the link. Payment always happens on the store's own page, and RoboTrunk never holds the money. No store pays for placement; RoboTrunk may earn a commission from some stores via their affiliate programs. - **Markdown copy:** Every page has a Markdown copy: [this page's copy](https://robotrunk.com/products/ucp/albeebaby-com/9676590743783.md). - **Photos and ratings:** Search results carry the product photo and, where the store's own page publishes one, its rating (`search_catalog`). - **Fit answers:** `check_fit` answers whether a listing fits a car, pram or bottle, with the exact quote from the store's page, or says it is not known. - **Back-in-stock watches:** `watch_back_in_stock` starts a watch on a listing the store shows as sold out; `get_back_in_stock_watch` shows when it is back in stock. - **Maker's manual:** `ask_product_manual` answers from the maker's manual with the exact passage and page, or says the manual does not cover it. - **Tools and guide:** Every tool and its description is at https://robotrunk.com/mcp; the guide is at [/agents\.md](/agents.md). - **Research from other stores:** Coming soon: reading other stores' listings of the same product as research sources. Sold and shipped by albeebaby\.com, albeebaby.com; payment happens on the store's own checkout. Brand: PEG ## Variants - Default Title: USD 359.99; in stock. Variant id: `gid://shopify/ProductVariant/52498634965223` - Seller: albeebaby\.com. Price: USD 359\.99. Stock: in stock. Variant: Default Title, variant id `gid://shopify/ProductVariant/52498634965223`. shipping not recorded; confirmed at merchant checkout. returns not recorded; confirmed at merchant checkout. [Public evidence](https://dd1dfe-a3.myshopify.com/products/peg-primo-viaggio-nido-infant-car-seat-jade). [Comparison page](/compare/want/infant-car-seat-expiration-dates-compared). [Get ready to buy from albeebaby\.com: prepare checkout](/checkout-prepare?merchant=albeebaby-com&product_id=gid%3A%2F%2Fshopify%2FProduct%2F9676590743783&variant_id=gid%3A%2F%2Fshopify%2FProductVariant%2F52498634965223). ## Checked facts Each fact below was checked against the source it cites before it was published. Each carries that source's link and the time RoboTrunk read it. 74 checked facts, checked 2026-10-10T14:45:45.935Z. Research depth: trimmed read. Deep read: the store's own data and 14 outside pages \(the store's own product page; maker page; manual; review; blog; regulator recall search \(CPSC \(United States\)\); regulator recall search \(Health Canada\); official safety test results \(CREP, the Child Restraint Evaluation Program\); official safety test results \(NHTSA's Car Seat Ease of Use Ratings\); video review \(derived summary of its captions\)\), each read in full by RoboTrunk and trimmed to its main content, then written up and checked\. Facts from the maker or a manual quote the page word for word; what real users report is summarised with a link to the page read\. Recall status was checked directly with CPSC \(United States\), Health Canada: CPSC recall search for PEG returned 9 records; none names the Primo Viaggio Nido\. Health Canada records include Transport Canada child car seat label recalls by PEG PEREGO and an UPPAbaby adapter recall, but none names the Primo Viaggio Nido, so no recall was found for this exact model\. Official safety test results were looked up directly with CREP, the Child Restraint Evaluation Program, NHTSA's Car Seat Ease of Use Ratings: CREP, the Child Restraint Evaluation Program: The published list of 216 tested seats has no brand or seat name containing Peg or Primo Viaggio Nido, so this model was not rated by CREP\. NHTSA's Car Seat Ease of Use Ratings: The published list of 126 tested seats includes four Peg Perego booster seats, but no Primo Viaggio Nido infant seat; the list is complete, so this model was not rated\. Not read, because they are member\-only or refused RoboTrunk: Consumer Reports car seat ratings, Which? child car seat tests, JPMA certified products\. - stroller compatibility tags: Store feed tags list compatibility with Baby Jogger Premier, BOB Alterrain, BOB Revolution Flex, City Mini, UPPAbaby Cruz, Egg, Era, Gazelle, and Indie strollers\.. Source: (listing), read 2026-10-09T19:03:04.916Z. - use duration: The seat was used from the hospital until 18 months, when the child reached the 32\-inch height limit\.. Source: (review), read 2026-10-10T14:17:22.261Z. - canopy and base: The canopy is huge with two mesh side vents and extends in front of the baby for sun protection; the base has an anti\-rebound bar and a 10\-position load leg that prevents rotation in an accident by more than 50%\.. Source: (review), read 2026-10-10T14:17:22.579Z. - product name: The product is the PEG Primo Viaggio Nido Infant Car Seat in the Jade color\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - weight limits: With LATCH, the seat is for children 4\-35 lbs\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - expiration: The seat expires seven years from the date of manufacture listed on its label\.. Source: (review), read 2026-10-10T14:13:40.903Z. - overall scores: Overall score 63, with crash test 7\.3, LATCH install 5\.8, belt install 5\.5, baseless install 7\.0, ease of use 5\.0, comfort/quality 4\.0, and weight/size 6\.4\.. Source: (review), read 2026-10-10T14:13:44.885Z. - general: The seat is safe, attractive, and straightforward; the load leg is rare in US seats and reduces downward rotation in frontal collisions\.. Source: (review), read 2026-10-10T14:13:52.043Z. - features and compatibility: Safety features include side impact protection, a load leg, and an anti\-rebound bar; the European\-style belt path makes baseless installation quick for taxis and rideshares; the no\-rethread harness has a six\-position headrest; the canopy unzips for near full coverage; the footprint is 28\.5 inches deep, and stroller compatibility is limited to certain brands\.. Source: (review), read 2026-10-10T14:13:55.748Z. - specs and safety: It is a premium Italian infant car seat with a load leg, anti\-rebound bar, and kinetic pods; weight limit 4–35 pounds or up to 32 inches; product weight 10 pounds without base; dimensions 17 W x 26 D x 24 H; base included with adjustable load leg and anti\-rebound bar\.. Source: (blog, Snuggle Bugz, published 2026-01-20), read 2026-10-10T14:14:00.771Z. - stroller compatibility tags: Store feed tags also list compatibility with Speed, Veer Cruiser, UPPAbaby Vista, and Ypsi strollers\.. Source: (listing), read 2026-10-09T19:03:04.916Z. - weight: The carrier weighed about 9\.5 pounds without the base and 16\.9 pounds with the base, which is not the lightest but not the heaviest\.. Source: (review), read 2026-10-10T14:17:22.261Z. - SKU: The Jade variant's SKU is IMPV07US00MB14\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - height limit: Maximum child height is 32 inches\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - handle position: When installed with the base, the handle must be aligned with the top of the car seat, and toys must not be hung from the handle\.. Source: (review), read 2026-10-10T14:13:40.903Z. - crash test: Crash testing showed lower sensor G forces than many competitors and a higher margin of protection than average; head injury criteria were lower and chest clip results were low but better than average\.. Source: (review), read 2026-10-10T14:13:44.885Z. - size and lifespan: The shell is 17 inches wide and good for three\-across; it weighs 11 pounds with both inserts and has a 7\-year lifespan for seat and base; it is FAA approved, but the base cannot be used on an airplane\.. Source: (review), read 2026-10-10T14:13:52.043Z. - headrest and foam: The six\-position SIP headrest adjusts with one hand and no rethreading, even while the baby is buckled in; EPS foam lines the shell and head panel; kinetic pods act like external bumpers to redirect side\-impact energy\.. Source: (blog, Snuggle Bugz, published 2026-01-20), read 2026-10-10T14:14:00.771Z. - origin: The seat is made in Italy\.. Source: (listing), read 2026-10-09T19:03:04.916Z. - canopy and fabric care: The canopy extends almost to the baby's feet and has side vents; the fabric is removable and hand washable\.. Source: (review), read 2026-10-10T14:17:22.261Z. - UPC: The Jade variant's UPC is 888487052121\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - inflatable belts: Do not use the car seat without the base with inflatable shoulder belts\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - canopy: The canopy is very large, with an additional zip\-out section and side vents\.. Source: (review), read 2026-10-10T14:13:40.903Z. - LATCH install: LATCH installation was difficult to tighten while managing the load leg and anti\-rebound bar\.. Source: (review), read 2026-10-10T14:13:44.885Z. - installation and load leg: Installation was straightforward but the seat has a reputation for being tricky in some cars; seat belt and LATCH options usually allow a workable install if you take time, and the load leg may not work in vehicles with raised or humped floors\.. Source: (review), read 2026-10-10T14:13:52.043Z. - load leg and anti\-rebound: The load leg has an energy management foot that stabilizes and crumples on impact; the anti\-rebound bar limits rotation\.. Source: (blog, Snuggle Bugz, published 2026-01-20), read 2026-10-10T14:14:00.771Z. - harness and handle: The five\-point harness was easy to tighten and loosen, but unbuckling the small buckles was a chore, and the handle adjustment needed two hands\.. Source: (review), read 2026-10-10T14:17:22.261Z. - weight limits: The store listing recommends the seat for children 4\-30 lbs and up to 32 inches, while the manual gives a 35 lb upper limit with LATCH or vehicle belt\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - assembly: All assembly must be performed by an adult\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - load leg: The load leg was smoother and more intuitive than several competitor load legs, but getting the final click to reach the vehicle floor was difficult\.. Source: (review), read 2026-10-10T14:13:40.903Z. - lock\-off: The lock\-off was sub\-par and would not stay locked or provide tensioning\.. Source: (review), read 2026-10-10T14:13:44.885Z. - cushions and canopy: Dual\-stage cushions: stage 1 for newborns as small as 4 pounds, stage 2 for growing infants; soft, breathable, chemical\-free; UPF 50\+ canopy zips forward for full sun and wind protection\.. Source: (blog, Snuggle Bugz, published 2026-01-20), read 2026-10-10T14:14:00.771Z. - baseless install and latching: Baseless installation with the seat belt through the handle and back was easy; sometimes the carrier was hard to latch into the base and had to be pressed down to get both green indicators\.. Source: (review), read 2026-10-10T14:17:22.261Z. - dimensions: Dimensions with the car seat on the base are 28\.5 by 17\.25 by 26\.5 inches\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - anti\-rebound bar assembly: The anti\-rebound bar snaps into the base before first use\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - recline: The recline angle is based on the baby's weight; testers found the manual unclear for larger newborns, and Peg Perego told them the recline bubble is only a guide\.. Source: (review), read 2026-10-10T14:13:40.903Z. - load leg: The load leg was bothersome and strangely designed; testers wondered if it was broken, and it gave no color change to confirm correct use\.. Source: (review), read 2026-10-10T14:13:44.885Z. - design and considerations: No\-rethread harness, European belt path, handlebar belt path for baseless installs, lightweight carrier, made in Italy with Fresco Jersey fabrics that are breathable, flame\-retardant\-free, and machine washable; considerations are that 17\-inch width may be tight in very compact vehicles and the base with load leg takes extra floor space\.. Source: (blog, Snuggle Bugz, published 2026-01-20), read 2026-10-10T14:14:00.771Z. - stability: The anti\-rebound bar and stability floor foot gave extra safety and stability, with no shaking in the car\.. Source: (review), read 2026-10-10T14:17:22.261Z. - carrier weight: The carrier weighs 8\.2 lbs without the hood and inserts\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - LATCH anchor spacing: LATCH anchors in the vehicle are spaced about 11 inches apart\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - recline in flat seats: Testers had trouble reaching the correct recline in a car with relatively flat seats; Peg Perego allowed a rolled towel or pool noodle to add recline\.. Source: (review), read 2026-10-10T14:13:40.903Z. - tightening stability: Getting the base tight was hard because the anti\-rebound bar shifted during tightening; the first attempt was wobbly, and it was better in a small SUV than a sedan\.. Source: (review), read 2026-10-10T14:13:44.885Z. - base weight: The base weighs 11 lbs\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - load leg benefit: The load leg provides a more stable platform and reduces rotation of the seat in a frontal collision\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - carrier attachment indicator: The red/green carrier attachment indicator can show green even when the carrier is not securely clicked in, so the handle should be pulled up to confirm attachment\.. Source: (review), read 2026-10-10T14:13:40.903Z. - leveling: Leveling the base took time and precision, and the turning knob required many turns\.. Source: (review), read 2026-10-10T14:13:44.885Z. - Kinetic Pods: Kinetic Pods provide additional side impact protection and move forces away from the baby in a side collision\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - Right Tight lockoff: The Right Tight lockoff clip closes with an audible click\.. Source: (manual), read 2026-10-10T14:13:34.680Z. - lower anchor storage: The lower anchor connectors are stored behind a plastic compartment door that came off in a tester's hand; it was easy to reattach\.. Source: (review), read 2026-10-10T14:13:40.903Z. - LATCH release buttons: The push\-style LATCH connectors have a small red release button that was harder to use than some others\.. Source: (review), read 2026-10-10T14:13:44.885Z. - canopy: The extendable Pagoda Hood has a zipper, mesh side netting for ventilation, and UPF 50\+ fabric\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - lower anchor installation: Lower anchor installation without a pool noodle was straightforward, but adding a pool noodle made the install difficult and gained only a tiny amount of recline\.. Source: (review), read 2026-10-10T14:13:40.903Z. - vehicle belt install: Vehicle belt installation was the most complicated method; the lock\-off popped open and did not help, so the vehicle retractor had to be engaged to get the belt tight\.. Source: (review), read 2026-10-10T14:13:44.885Z. - flame retardants: The seat is 100% FR Free of harmful chemicals\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - seat belt and baseless installation: Vehicle seat belt installation was straightforward with the lockoff, and baseless installation is possible with American or European routing; European routing felt secure\.. Source: (review), read 2026-10-10T14:13:40.903Z. - baseless install: Baseless installation was the easiest method, using the European belt path and color\-coded slots; the handle must be forward, and the shoulder portion was a struggle\.. Source: (review), read 2026-10-10T14:13:44.885Z. - base features: The premium base has a built\-in Anti\-Rebound Bar and a 10\-position metal load leg\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - insert use: The stage 1 insert is generally for use until about 8 pounds or when the baby's torso fills the gap between the crotch buckle and straps; the stage 2 insert has no use guidelines in the manual\.. Source: (review), read 2026-10-10T14:13:40.903Z. - belt length: They almost ran out of vehicle belt length wrapping it around the back of the carrier, and the seat felt very wobbly\.. Source: (review), read 2026-10-10T14:13:44.885Z. - Right Tight System: The Right Tight System locks the base in place with either the LATCH strap or the vehicle's seat belt\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - insert fit: Many babies got a better fit with the stage 1 insert even when they were above the manual's weight range\.. Source: (review), read 2026-10-10T14:13:40.903Z. - buckle and chest clip: The main buckle was very stiff and left a tester's thumb tender; the chest clip button on the left was harder to press\.. Source: (review), read 2026-10-10T14:13:44.885Z. - foam: The seat uses EPS and EPP foam for protection and comfort throughout the shell and headrest\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - preemie and newborn fit: A preemie doll fit well with the stage 1 insert, but a newborn doll had the crotch buckle below the knees with the insert and head slump without it\.. Source: (review), read 2026-10-10T14:13:40.903Z. - harness and cover durability: Harness tightening was easy and the shoulder straps moved smoothly, but the harness height adjustment sits behind a flimsy plastic cover that frequently fell off\.. Source: (review), read 2026-10-10T14:13:44.885Z. - side impact headrest: Adjustable side impact protection moves to six positions with no re\-threading required\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - 10\-week\-old fit: A 10\-week\-old about 13 pounds and 24 inches fit beautifully with the stage 2 insert, while another 10\-week\-old about 13 pounds and 22 inches had head slump without the stage 1 insert and the crotch buckle under the knees with it\.. Source: (review), read 2026-10-10T14:13:40.903Z. - newborn cushions: The Dual Stage Cushion System gives head support and a snug seating position for newborns\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - 4\-month\-old fit: A 4\-month\-old about 16 pounds and 25 inches had the stage 2 buckle dig into the thighs, and without the insert the chin pressed toward the chest\.. Source: (review), read 2026-10-10T14:13:40.903Z. - harness retainer: A harness retainer stabilizes the harness clips so they are easier to find when securing the baby\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - 7\-month\-old fit: A 7\-month\-old about 18 pounds and 29 inches had outgrown the stage 2 insert and still had some head slump without any inserts\.. Source: (review), read 2026-10-10T14:13:40.903Z. - baseless installation: The European Belt Path lets the carrier be installed securely without the base\.. Source: (guide), read 2026-10-10T14:13:24.809Z. - stroller compatibility: The seat is compatible with most PEG strollers, and with other brand strollers using adapters\.. Source: (guide), read 2026-10-10T14:13:24.809Z. The full evidence pack, with every citation, source and gap: [evidence pack](/agent/evidence/albeebaby-com--peg-primo-viaggio-nido-infant-car-seat-jade) ## Questions we researched but could not confirm Every fact above is cited. To find them we read the store listing, the maker's page, the manual, owner reviews, blogs, video reviews, the recall records of CPSC \(United States\) and Health Canada and the safety test results of CREP, the Child Restraint Evaluation Program and NHTSA's Car Seat Ease of Use Ratings and searched for regulator recall notices and owner forums. We also chased the questions below across those sources and found no reliable answer, so you know exactly where the evidence ends and never have to guess. - What is the warranty period and what does it cover? - What exactly is included in the box with the Jade car seat? - How should I wash the Jade seat cover and inserts? - Which stroller adapters are needed for UPPAbaby strollers? - Does the Jade fabric feel plush or thin? - Will the seat fit three across in a compact car? - Is there an independent side\-impact crash test rating for this seat? - Does the harness buckle loosen with use? - Does the seat fit a UPPAbaby Cruz without an adapter? - Are replacement parts available in the Jade color? - What is the seat's exact weight with the Jade fabric and inserts? - What age range is the seat intended for? - Does the seat fit a 2017 Honda Civic without a pool noodle? - How does the Jade fabric resist stains and snags? To buy this through RoboTrunk, pass merchant `albeebaby-com`, product_id `gid://shopify/Product/9676590743783` and one variant_id from the list above. Product image of PEG Primo Viaggio Nido Infant Car Seat \- Jade, supplied by albeebaby\.com: This product on albeebaby.com: Retrieved 2026-10-19T19:33:47.485Z from This page is published by RoboTrunk, a store built for shopping agents. The store named on this page sells the product and ships it. RoboTrunk is not the seller and never holds the money. Buying works in one path. RoboTrunk's tools prepare a checkout at that store, then hand back a short-lived link. The person approves the total; once RoboTrunk has checked the store's total against it, the person is given the checkout link to tap in their own browser, or, if the person prefers and gives permission, their agent may open the link and finish there, and payment always happens on the store's own checkout page. RoboTrunk never takes the payment or sees a card. Where the rest of this site is: - /agent/story.md is what RoboTrunk is and how it works, in full. - /agent/tools.json is every tool, its arguments and its answers. - /agent/merchants is every store you can buy from through RoboTrunk. - /products/ucp is every store's indexed products. - /products/search is one search across every store, in plain words. - [What RoboTrunk is](/agent/story.md) - [The tools and how to call them](/agent/tools.json) - [The stores you can buy from](/agent/merchants) - [Every store's products](/products/ucp) - [Search every store at once](/products/search)