# Moving a rear child bike seat to another bike

Can a child's rear bike seat be taken off quickly and moved to a different bike?

Thule Yepp Nexxt 2 Maxi: The seat arrives fully assembled; mounting on a rack uses a rear knob to open rubber\-covered clamps, then tighten them after positioning\. Installation takes a few minutes and the fixation feels secure\. The rack mount is secured with a key to deter theft\. Thule Yepp Maxi 2 / Yepp 2 Maxi: Designed to secure directly onto an existing rear bike rack\. Thule Yepp 2 Maxi: Fitting the mount and seat was simple; the frame mount clamps the seat tube with four screws and short and long screws are supplied for different frames and e\-bikes\. The manual for the other Yepp 2 maxi frame mount variant \(120412XX\) lists the Thule Yepp Raincover 12020974, Thule Delight 2 20201529, Thule Quick Release Bracket 100203 and Thule Yepp Harness Clip 12020920\.

### 1. [Thule Yepp Nexxt 2 Maxi](/products/ucp/albeebaby-com/9722096124135) (sold by albeebaby\.com)

The seat arrives fully assembled; mounting on a rack uses a rear knob to open rubber\-covered clamps, then tighten them after positioning\. Installation takes a few minutes and the fixation feels secure\.

- Installation: The seat arrives fully assembled; mounting on a rack uses a rear knob to open rubber\-covered clamps, then tighten them after positioning\. Installation takes a few minutes and the fixation feels secure\. (review) <https://www.transitionvelo.com/test/test-thule-yepp-nexxt-2-maxi-un-siege-enfant-velo-pratique-et-leger/>
- Mount type: For safety, the seat should only be installed on racks that comply with EN ISO 11243:2016 and are marked with a 27 kg load capacity\. (guide) <https://www.thule.com/es-us/child-bike-seats/rear-mounted-child-bike-seats/thule-yepp-nexxt-2-maxi-_-12081301>
- Quick release: -
- Security: The rack mount is secured with a key to deter theft\. (review) <https://www.youtube.com/watch?v=2MlW_R2t5OY>

### 2. [Thule Yepp Maxi 2 / Yepp 2 Maxi](/products/ucp/albeebaby-com/9596856238311) (sold by albeebaby\.com)

Designed to secure directly onto an existing rear bike rack\.

- Installation: -
- Mount type: Designed to secure directly onto an existing rear bike rack\. (guide) <https://www.thule.com/en-ca/child-bike-seats/rear-mounted-child-bike-seats/thule-yepp-2-maxi-_-12041302>
- Quick release: -
- Security: -

### 3. [Thule Yepp 2 Maxi](/products/ucp/albeebaby-com/9564468412647) (sold by albeebaby\.com)

The manual for the other Yepp 2 maxi frame mount variant \(120412XX\) lists the Thule Yepp Raincover 12020974, Thule Delight 2 20201529, Thule Quick Release Bracket 100203 and Thule Yepp Harness Clip 12020920\.

- Installation: Fitting the mount and seat was simple; the frame mount clamps the seat tube with four screws and short and long screws are supplied for different frames and e\-bikes\. (review) <https://www.cyclesprog.co.uk/reviews/thule-yepp-2-maxi-rear-seat-review/>
- Mount type: The frame mount has a tall body with a large contact area on the seat tube, giving stability and protecting thin\-walled frames; the cartridge does not protrude far towards the tyre, so it should fit most standard frames\. (review) <https://portal.bikeworld.pl/artykul/testy_i_nowosci/testy_akcesoriow/19602/test_fotelik_rowerowy_thule_yepp_2_maxi>
- Quick release: The manual for the other Yepp 2 maxi frame mount variant \(120412XX\) lists the Thule Yepp Raincover 12020974, Thule Delight 2 20201529, Thule Quick Release Bracket 100203 and Thule Yepp Harness Clip 12020920\. (manual) <https://www.thule.com/-/s/approved/std.lang.all/05/75/1600575.pdf?rev=3.2>
- Security: -

Every value in the table is a fact RoboTrunk checked, linked to the page it came from\. A dash means no checked fact fills that cell\.

Prices and stock change, so this page prints neither: each product name links to its RoboTrunk page, which shows them live\.

Written 2026-10-17T13:22:27.707Z.

This page is published by RoboTrunk, a store built for shopping agents.

The store named on this page sells the product and ships it. RoboTrunk is not
the seller and never holds the money.

Buying works in one path. RoboTrunk's tools prepare a checkout at that store,
then hand back a short-lived link. The person approves the total; once RoboTrunk
has checked the store's total against it, the person is given the checkout link to
tap in their own browser, or, if the person prefers and gives permission, their
agent may open the link and finish there, and payment always happens on the
store's own checkout page. RoboTrunk never takes the payment or sees a card.

Where the rest of this site is:

- /agent/story.md is what RoboTrunk is and how it works, in full.
- /agent/tools.json is every tool, its arguments and its answers.
- /agent/merchants is every store you can buy from through RoboTrunk.
- /products/ucp is every store's indexed products.
- /products/search is one search across every store, in plain words.

- [What RoboTrunk is](/agent/story.md)
- [Every tool, in your browser through WebMCP](/agent)
- [The tools and how to call them](/agent/tools.json)
- [The stores you can buy from](/agent/merchants)
- [Every store's products](/products/ucp)
- [Search every store at once](/products/search)