# Booster seats that install with the vehicle seat belt and no LATCH Which booster car seats can be installed using only the vehicle seat belt, without LATCH anchors? Diono Solana 2 \(no LATCH\) XL Backless Booster: This version has no LATCH: it is held by the vehicle seat belt only, so it lifts out easily for storage in the trunk\. Only a lap\-and\-shoulder belt can be used; a lap\-only belt in an older vehicle's centre seat rules the booster out there\. Maxi\-Cosi Tanza \(BC197\): The store says it can be secured with the vehicle seat belt when LATCH is not used\. Clek Olli: It may be used without lower anchors if placed firmly against a forward\-facing vehicle seat and secured by the lap\-and\-shoulder belt; the rigid connectors tuck into the seat crease\. Clek Oobr: A vehicle without lower anchors can use the booster without its LATCH connectors, but the unused booster must be secured by the vehicle belt\. Cybex Solution B2\-fix \+ Lux: The booster can be installed without lower anchors, but only in a permitted seating position with a lap\-and\-shoulder belt\. ### 1. [Diono Solana 2 \(no LATCH\) XL Backless Booster](/products/ucp/megababiesusa-com/7926209642750) (sold by megababiesusa\.com) This version has no LATCH: it is held by the vehicle seat belt only, so it lifts out easily for storage in the trunk\. - Belt\-only install: This version has no LATCH: it is held by the vehicle seat belt only, so it lifts out easily for storage in the trunk\. (guide) - Child limits: It is for children weighing 40 to 120 lb\. (guide) - Seat weight: The seat weighs 5\.1 lb\. (guide) ### 2. [Maxi\-Cosi Tanza \(BC197\)](/products/ucp/anbbaby-com/9891220226334) (sold by anbbaby\.com) The store says it can be secured with the vehicle seat belt when LATCH is not used\. - Belt\-only install: The store says it can be secured with the vehicle seat belt when LATCH is not used\. (guide) - Child limits: It is designed for children weighing 40–100 lb and measuring 43\.4–57 inches tall\. (guide) - Seat weight: The booster weighs 16\.5 lb\. (guide) ### 3. [Clek Olli](/products/ucp/anbbaby-com/9829484658974) (sold by anbbaby\.com) It may be used without lower anchors if placed firmly against a forward\-facing vehicle seat and secured by the lap\-and\-shoulder belt; the rigid connectors tuck into the seat crease\. Recall notice: Health Canada and Transport Canada, 2024\-11\-07: [Transport Canada Recall \- 2024716 \- CLEK](https://recalls-rappels.canada.ca/en/alert-recall/transport-canada-recall-2024716-clek) (safety notice, not a recall). The notice may cover only some serial numbers or dates of manufacture, which this listing does not show\. [What a match means](/recall-radar). - Belt\-only install: It may be used without lower anchors if placed firmly against a forward\-facing vehicle seat and secured by the lap\-and\-shoulder belt; the rigid connectors tuck into the seat crease\. (manual) - Child limits: The child must be 40–57 inches tall and weigh 40–120 pounds; Clek recommends a minimum age of 4 years\. (guide) - Seat weight: The booster weighs 5 pounds\. (guide) ### 4. [Clek Oobr](/products/ucp/anbbaby-com/9828944838942) (sold by anbbaby\.com) A vehicle without lower anchors can use the booster without its LATCH connectors, but the unused booster must be secured by the vehicle belt\. Recall notice: Health Canada and Transport Canada, 2024\-11\-07: [Transport Canada Recall \- 2024716 \- CLEK](https://recalls-rappels.canada.ca/en/alert-recall/transport-canada-recall-2024716-clek) (safety notice, not a recall). The notice may cover only some serial numbers or dates of manufacture, which this listing does not show\. [What a match means](/recall-radar). - Belt\-only install: A vehicle without lower anchors can use the booster without its LATCH connectors, but the unused booster must be secured by the vehicle belt\. (manual) - Child limits: The sources disagree on minimum height: the current maker page specifies 43\.3–57 inches for both modes, while the February 2020 manual starts full\-back use at 38 inches and backless use at 40 inches; the current page specifies 40–100 pounds and recommends a minimum age of 4 years\. (guide) - Seat weight: The seat weighs 20 pounds in full\-back form and 10 pounds in backless form\. (guide) ### 5. [Cybex Solution B2\-fix \+ Lux](/products/ucp/anbbaby-com/6635858329686) (sold by anbbaby\.com) The booster can be installed without lower anchors, but only in a permitted seating position with a lap\-and\-shoulder belt\. - Belt\-only install: The booster can be installed without lower anchors, but only in a permitted seating position with a lap\-and\-shoulder belt\. (manual) - Child limits: - - Seat weight: The store feed gives the seat weight as 10\.3 lb\. (listing) ## Also cited in the text - Diono Solana 2 \(no LATCH\) XL Backless Booster, belt type required: Only a lap\-and\-shoulder belt can be used; a lap\-only belt in an older vehicle's centre seat rules the booster out there\. (review) Every value in the table is a fact RoboTrunk checked, linked to the page it came from\. A dash means no checked fact fills that cell\. Prices and stock change, so this page prints neither: each product name links to its RoboTrunk page, which shows them live\. Written 2026-10-28T06:27:32.665Z. ## Recall notices About the recall notices above: each matches a model named in a regulator's notice, as the index stood on 2026\-09\-25\. This listing is the brand and model a regulator's notice names\. Two AI models judged it so independently\. It does not mean the unit on sale is from an affected batch, that the store knew, or that the product is illegal where the store sells it; a US recall does not bind an Australian store\. The notice may cover only some serial numbers or dates of manufacture, which a listing does not show\. RoboTrunk never limits or blocks a purchase over a notice; read the notice and decide\. This page is published by RoboTrunk, a store built for shopping agents. The store named on this page sells the product and ships it. RoboTrunk is not the seller and never holds the money. Buying works in one path. RoboTrunk's tools prepare a checkout at that store, then hand back a short-lived link. The person approves the total; once RoboTrunk has checked the store's total against it, the person is given the checkout link to tap in their own browser, or, if the person prefers and gives permission, their agent may open the link and finish there, and payment always happens on the store's own checkout page. RoboTrunk never takes the payment or sees a card. Where the rest of this site is: - /agent/story.md is what RoboTrunk is and how it works, in full. - /agent/tools.json is every tool, its arguments and its answers. - /agent/merchants is every store you can buy from through RoboTrunk. - /products/ucp is every store's indexed products. - /products/search is one search across every store, in plain words. - [What RoboTrunk is](/agent/story.md) - [Every tool, in your browser through WebMCP](/agent) - [The tools and how to call them](/agent/tools.json) - [The stores you can buy from](/agent/merchants) - [Every store's products](/products/ucp) - [Search every store at once](/products/search)