# Booster car seats for a small child Which booster car seats suit a small child? Chicco MyFit Harness \+ Booster Car Seat: The manual gives harness mode as 26\.5\-65 lb, while the maker's own page gives the lower weight limit as 25 lb, so the sources disagree\. Chicco KidFit ClearTex Plus 2\-in\-1 Belt\-Positioning Booster Car Seat: The manual states the child must be at least 4 years old, 40 pounds and 44 inches tall to use this booster\. Mifold Hifold Fit\-And\-Fold Booster: The UK review site says it suits 15–45 kg / 90–150 cm, around 4 years old, while the maker's US site says 40–100 lbs and 43\.5–59 inches \(110–150 cm\), so the sources disagree; the reviewer recommends staying in a harness as long as possible\. Chicco GoFit ClearTex Backless Booster Car Seat: To use the booster, the child must be at least 4 years old, weigh 40 pounds, and be 44 inches tall\. Chicco GoFit Plus Backless Booster Car Seat: Use only with children who are at least 4 years old and can sit still in a seat belt\. ### 1. [Chicco MyFit Harness \+ Booster Car Seat](/products/ucp/strolleria-com/8063611240522) (sold by strolleria\.com) The manual gives harness mode as 26\.5\-65 lb, while the maker's own page gives the lower weight limit as 25 lb, so the sources disagree\. - Minimum child size: - - Harness mode: The manual gives harness mode as 26\.5\-65 lb, while the maker's own page gives the lower weight limit as 25 lb, so the sources disagree\. (manual) - Dimensions: The seat measures 21 in long, 17\.5 in wide and 26 in high\. (guide) - Installation: The seat's lockoff is among the easiest they have used for seat\-belt installation\. (review) ### 2. [Chicco KidFit ClearTex Plus 2\-in\-1 Belt\-Positioning Booster Car Seat](/products/ucp/strolleria-com/8065115029578) (sold by strolleria\.com) The manual states the child must be at least 4 years old, 40 pounds and 44 inches tall to use this booster\. - Minimum child size: The manual states the child must be at least 4 years old, 40 pounds and 44 inches tall to use this booster\. (manual) - Harness mode: - - Dimensions: Assembled size is about 17 in wide, 17 in deep and 26 in high\. (guide) - Installation: The booster is designed for lower LATCH anchors at the standard 11 inch \(28 cm\) spacing only\. (manual) ### 3. [Mifold Hifold Fit\-And\-Fold Booster](/products/ucp/strolleria-com/8212651278410) (sold by strolleria\.com) The UK review site says it suits 15–45 kg / 90–150 cm, around 4 years old, while the maker's US site says 40–100 lbs and 43\.5–59 inches \(110–150 cm\), so the sources disagree; the reviewer recommends staying in a harness as long as possible\. - Minimum child size: The UK review site says it suits 15–45 kg / 90–150 cm, around 4 years old, while the maker's US site says 40–100 lbs and 43\.5–59 inches \(110–150 cm\), so the sources disagree; the reviewer recommends staying in a harness as long as possible\. (blog) - Harness mode: - - Dimensions: - - Installation: It uses the vehicle's adult seat belt and does not use Isofix or Latch\. (guide) ### 4. [Chicco GoFit ClearTex Backless Booster Car Seat](/products/ucp/strolleria-com/8064527597642) (sold by strolleria\.com) To use the booster, the child must be at least 4 years old, weigh 40 pounds, and be 44 inches tall\. - Minimum child size: To use the booster, the child must be at least 4 years old, weigh 40 pounds, and be 44 inches tall\. (manual) - Harness mode: - - Dimensions: Assembled dimensions are 15 inches deep by 17 inches wide by 8\.5 inches high\. (guide) - Installation: Has integrated lap belt guides and a shoulder belt clip to position the vehicle seat belt\. (guide) ### 5. [Chicco GoFit Plus Backless Booster Car Seat](/products/ucp/strolleria-com/8064545685578) (sold by strolleria\.com) Use only with children who are at least 4 years old and can sit still in a seat belt\. - Minimum child size: Use only with children who are at least 4 years old and can sit still in a seat belt\. (manual) - Harness mode: - - Dimensions: Store lists product dimensions as 15 in × 17 in × 8\.5 in\. (guide) - Installation: Installation can take about five minutes: place the seat, extend and click the LATCH connectors, pull the tightening strap, check for movement, then route and buckle the vehicle belt\. (blog) Every value in the table is a fact RoboTrunk checked, linked to the page it came from\. A dash means no checked fact fills that cell\. Prices and stock change, so this page prints neither: each product name links to its RoboTrunk page, which shows them live\. Written 2026-11-01T00:36:06.974Z. This page is published by RoboTrunk, a store built for shopping agents. The store named on this page sells the product and ships it. RoboTrunk is not the seller and never holds the money. Buying works in one path. RoboTrunk's tools prepare a checkout at that store, then hand back a short-lived link. The person approves the total; once RoboTrunk has checked the store's total against it, the person is given the checkout link to tap in their own browser, or, if the person prefers and gives permission, their agent may open the link and finish there, and payment always happens on the store's own checkout page. RoboTrunk never takes the payment or sees a card. Where the rest of this site is: - /agent/story.md is what RoboTrunk is and how it works, in full. - /agent/tools.json is every tool, its arguments and its answers. - /agent/merchants is every store you can buy from through RoboTrunk. - /products/ucp is every store's indexed products. - /products/search is one search across every store, in plain words. - [What RoboTrunk is](/agent/story.md) - [Every tool, in your browser through WebMCP](/agent) - [The tools and how to call them](/agent/tools.json) - [The stores you can buy from](/agent/merchants) - [Every store's products](/products/ucp) - [Search every store at once](/products/search)